• Water-based
• No transfer on parts
• Reduces buildup
• No silicone oil
• Low usage rate
• Semi-gloss finish

• ReleaseTech 1150: Harder film
• ReleaseTech 1200: Higher slip, softer film
• ReleaseTech 1300: Regular slip, medium film
• ReleaseTech 1400: Tough surface, medium to harder film

ReleaseTech 1150 — For rubber-metal bonding, high-pressure molds, can also be used for slush molding (example: PVC skin for dashboards, headliners) if a semi-permanent is requested

ReleaseTech 1200 — Technical rubber compounds, can also be used for rotational molding, footwear

ReleaseTech 1300 — Technical rubber compounds, can also be used for window encapsulation

ReleaseTech 1400 — Technical rubber compounds, can also be used for very tough surfaces (example: rubber mats)

Semi-permanent / Permanent release agent for silicon rubber: ReleaseTech 1144

• Water-based
• Maximum releases per application — up to 500 cycles
• Silicone-free
• Reduces mold buildup

Conventional Rubber (including silicone): ReleaseTech S999

• Water-based
• Silicone-free
• Universal: Works well with both natural and synthetic rubber compounds
• Can be diluted
• Sacrificial

Conventional Release Agent for Radiator Hoses: ReleaseTech 1820

• Environmentally friendly
• Biodegradable
• Excellent lubrication and release
• Universal: Works well with all types of rubber compounds
• Is easily washed off

Unconventional Release Agent for Radiator Hoses: ReleaseTech 1822

• Inject during extrusion
• Environmentally friendly
• Biodegradable
• Excellent lubrication and release
• Universal: Works well with all types of rubber compounds
• Is easily washed off
• Lowers consumption, provides cleaner operation
• No direct contact with operator

Rigid Hose: ReleaseTech 1812

• Semi-permanent release agent for steel mandrels
• Used for nylon, metal and rubber mandrels
• Easy to apply
• Water-based Excellent slip and release characteristics

Additive for Rubber Compound: ReleaseTech 1815

• Non-blooming
• Easy to mix
• Reduces buildup on molds
• Pellet form, dust-free
• Supports and replaces external release agent
• Doesn’t interfere with bonding
• Low dosage

SlabDip: ReleaseTech 6600

• Clear product
• No separation in bath
• Low foaming
• Excellent release over long periods
• Low dosage

FutureProducts:

Weather stripping, batch-off, release agent for foam

External (Water — based)

• Dome (steam)
• Standard molds

• ReleaseTech 1150 for two — piece molds and segmented molds
• ReleaseTech 1200, ReleaseTech 1300 for segmented molds
• ReleaseTech 3800 for steam — heated molds, cures at room temperature

Internal Release Agent: ReleaseTech 1115

• Additive to rubber compound
• Replaces cast oil
• Extends bladder life
• Prevents cracks in bladders
• Dust — free

Tire Paints

Inside tire paint — ReleaseTech 1925

• Water — based
• Fast drying time
• Available in clear, black, gray
• Extends bladder life
• Excellent slip and release
• Excellent air bleed
• Mica — based

Outside tire paint — ReleaseTech 1926

• Water — based
• Fast drying time
• Available in black and clear
• Excellent flow properties

Reactive tire paint — ReleaseTech 1919

• Water — based
• Fast drying time
• Intermittent usage
• Excellent air bleed
• Non — mica — based

Rim Lube: ReleaseTech 1927

• Excellent slip
• Water — based
• Fast drying

Bladder Coating: ReleaseTech 1918

• Water — based
• Extends bladder life
• Supporting tire paint
• Better start — up benefits

Future Products:

Batch — off, sidewall spray, blemish paint

• Environmentally friendly
• Easily added to glue
• Long shelf life
• Increases flow properties of the glue
• Excellent release and wetting properties
• Used for UF, MUF and phenolic resin
• Increases technical properties of the board
• Reduces resin usage, formaldehyde content and buildup on plates

Internal Release Agent: ReleaseTech 446-OSB produced with PMDI

• Reduces sticking
• Lowers buildup
• Supports external release agent
• Extends releases

External Release Agent: ReleaseTech 403

• Used for all kinds of resin
• Excellent release and wetting properties
• Can be diluted with water
• Provides improved board surface
• Reduces buildup

External Release Agent: ReleaseTech 444-OSB Board

• Reduces swelling, bowing
• Gives water-resistant properties

External Release Agent: ReleaseTech 445-OSB produced with PMDI

• Reduces sticking
• Excellent releases
• No buildup

Surface Sealer: ReleaseTech 442

• Used for thin MDF boards (example: doorskin, backwalls of furniture)
• Excellent release characteristics
• Savings of resin up to 25% per day
• Excellent surface characteristics on boards as a result of usage

Future Products:

Scavengers to reduce formaldehyde, catalyst to cure resin and hardeners

• Water-based
• Low dosage
• Clear product
• Excellent release characteristics
• Stable in resin bath

Internal Release Agent: ReleaseTech 336 (for phenolic resin)

• Water-based
• Excellent release characteristics

Wetting and Release Agent:ReleaseTech 319

• Used with RT 330 and RT 320
• Used for melamine and urea resin

Wetting Agent: ReleaseTech 320 (melamine and urea resin)

• Excellent wetting properties
• Water-based
• Avoids fisheyes, stripes, and other surface defects
• Reduces surface tension
• Low foaming

Catalyst: ReleaseTech 340 (for melamine resin)

• Water-based
• Faster press cycle (10%+ improvement)
• No sagging of resin in bath

Modifier: ReleaseTech 352 (both melamine and urea resin)

• Added directly to resin bath
• Increases flow properties of the resin
• Avoids cracks on surface
• Provides a nice gloss finish
• Increases flexibility of impregnated paper

Antiblock: ReleaseTech 310

• Universal block system for amino plastic resin solution
• Prevents high humidity problems with sticking
• Excellent internal release agent for any aqueous resin system
• Does not change chemical or physical properties of melamine